Erich Wiesmueller Analysegeraete/ Spektrometer
Tel.: +43 (0) 2262 72027 E-Mail: office.wiesmueller@gmail.com

english Deutsch

  • science lab equipment
  • lab equipment
  • Analyzers spectrometry
  • Quality Control Spectrometers

Oxygen/Nitrogen/Hydrogen Combustion Analyzer | EMGA-930

More Views

Attachments

Oxygen/Nitrogen/Hydrogen Combustion Analyzer | EMGA-930
€1,000,000.00

Overview

EMGA-930 O/N/H analyzer: It’s a "New flagship model” for O/N/H analyzers and user friendly product.

This is a simultaneous oxygen, nitrogen & hydrogen elemental analyzer with high accuracy and repeatability suiting to cutting-edge technology’s R&D as well as quality control in the market of steel, new materials, catalyst and so on. This is a new generation model optimized to fit to user’s requests.

The oxygen is measured as carbon monoxide and carbon dioxide by two non-dispersive infrared detectors, the nitrogen by a thermal conductivity detector and the hydrogen with non dispersive Infra Red detector as H2O.

Features

  • Super High Performance
  • User-friendly software
  • Fully Supported Accessories give simple operation
  • Improved Mechanism
  • Dual Sample/Flux introduction mechanism

Specifications

EMGA-930: Oxygen/Nitrogen/Hydrogen analyzer

Principle

Oxygen: Non Dispersive Infrared detector

Nitrogen: Thermal Conductivity detector(TCD)

Hydrogen: Non dispersive Infrared detector (as H2O)

Measurement range*:

Oxygen: 0-5%, Nitrogen: 0-3%, Hydrogen: 0-0.25%

*Up to 100% wt is possible by decreasing the sample weight.

Sample weight: 1.0 ± 0.1g

Sensitivity(Minimum reading):Oxygen/Nitrogen/Hydrogen: 0.001 ppm.

Accuracy**(Repeatability)

Oxygen/Nitrogen

σn-1≦0.02 ppm or RSD≦0.5% whichever is larger (Reference gas)

σn-1≦0.3 ppm or RSD≦1.0% whichever is larger (Standard sample)

Hydrogen

σn-1≦0.04 ppm or RSD≦2% whichever is larger (Reference gas)

** Based on the sample weight 1.0 ± 0.1g and with automation functions described below

Display

Measurement result: LCD or printout

Alarm message: LCD or printout

Flow sheet: LCD

Power of furnace

Inert gas fusion in impulse furnace

Enable to set the generating power 0 – 8.0 kw

Sample introduction: Dual sample/flux introduction mechanism

Automation functions: Auto cleaner, Crucible loader

Integration conditions:

Preset time integration

Integration up to reach comparator level

Preset time integration or integration up to reach comparator level, whichever is shorter

Sample ID: Enter up to 20 one-byte characters

Calibration

One point or multi point calibration (Reference gas or standard samples)

Calibration using previous analysis data

Calibration curve correction function

Functions

Display of real time extraction curve

Analysis interruption

Self diagnosis and alarm display

Analysis of extraction curve (Superposition, difference etc analysis)

Out put (RC-232C or TCP/IP)

Dimensions: 750mm(H)×785mm(D)×653mm(W)

Sample introduction is positioned at 650mm from table.

Weight: 230kg

On carrying, it is divided in two units (Under 140kg/unit)

Computer: PC model operating OS Windows® XP(SP2) and beyond

Power

Main unit: AC200/220/230/240V ± 10%

Auto cleaner: AC100V (Step-down transformer)

Frequency: 50/60 ± 1Hz

Electric power consumption

Main unit:12kVA (MAX)

Auto cleaner: 1.5kVA (MAX)

Ground resistance: Less than 10Ω

Installation condition

Operation temperature: 5-40°C

Performance temperature: 5-35°C

Humidity: Maximal relative humidity 80%RH between 5-31℃, linearly decrease down to 50%RH between 31-40℃

Vibration: Duplex amplitude 20micron and less than 0.098m/S2 accelerations at frequency band

Required gas

He carrier gas: Purity greater than 99.995%, Pressure 0.35MPa

Stainless steel pipe(O.D.3mm) and suitable connecter fitting within 3m of unit

Dry air or N2 as operating gas: Pressure 0.45MPa

Nylon pipe (O.D.6mm) and suitable connecter fitting within 5m of unit

Cooling mechanism: Radiator unit (Separation type)

Electronic balance (Option)

Enable connection with electronic balance with 1-0.01mg minimum display

Optional automatic voltage regulator (AVR)

Capacity:15kVA

Weight: 130kg

Availability: In stock

OR
Description
Additional Information
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Used Spark Spectrometers | Spark Spectrometer | Optical Emission Spectrometers | X Ray Diffractometer