Erich Wiesmueller Analysegeraete/ Spektrometer
Tel.: +43 (0) 2262 72027 E-Mail:

english Deutsch

  • science lab equipment
  • lab equipment
  • Analyzers spectrometry
  • Quality Control Spectrometers

Oxygen/Nitrogen Combustion Analyzer | EMGA-920

More Views


Oxygen/Nitrogen Combustion Analyzer | EMGA-920


EMGA-920 O/N analyzer: It’s a "New flagship model” for O/N analyzers and user friendly product.
This is an oxygen and nitrogen elemental analyzer with high accuracy and repeatability suiting to cutting-edge technology’s R&D as well as quality control in the market of steel, new materials, catalyst and so on. This is a new generation model optimized to fit to user’s requests.

The oxygen is measured as carbon monoxide and carbon dioxide by a non-dispersive infrared detector and the nitrogen by a thermal conductivity detector.


  • Super High Performance 
  • User-friendly software 
  • Fully Supported Accessories give simple operation 
  • Improved Mechanism 
  • Dual Sample/Flux introduction mechanism


EMGA-920: Oxygen/Nitrogen analyzer


Oxygen:Non Dispersive Infrared detector
Nitrogen:Thermal Conductivity detector(TCD)

Measurement range*: 
Oxygen:0-5%, Nitrogen:0-3%
*Up to 100% wt is possible by decreasing the sample weight.

Sample weight:1,0 ± 0,1g

Sensitivity(Minimum reading):Oxygen/Nitrogen: 0.0000001%(m/m)

σn-1≦0.02%(m/m) or CV≦0.5% whichever is larger (Reference gas)
σn-1≦0.3%(m/m) or CV≦1.0% whichever is larger (Standard sample)
** Based on the sample weight 1,0 ± 0,1g and with automation functions described below


  1. Measurement result: LCD or printout 
  2. Alarm message: LCD or printout 
  3. Flow sheet: LCD

Power of furnace

Iner gas fusion in impulse furnace
Enable to set the generating power 0 - 8,0kw

Sample introduction:Dual sample/flux introduction mechanism

Automation functions:Auto cleaner, Crucible loader

Integration conditions:

Preset time integration
Integration up to reach comparator level
Preset time integration or integration up to reach comparator level, whichever is shorter

Sample ID:Enter up to 20 one-byte characters


  1. One point or multi point calibration (Reference gas or standard samples) 
  2. Calibration using previous analysis data
  3. Calibration curve correction function


  1. Display of realtime extraction curve 
  2. Analysis interruption 
  3. Self diagnosis and alarm display 
  4. Analysis of extraction curve (Superposition, difference etc analysis) 
  5. Out put (RC-232C or TCP/IP)

Dimensions: 750mm(H)×785mm(D)×653mm(W)
Sample introduction is positioned at 650mm from table.

Weight: 230kg
On carrying, it is divided in two units (Under 140kg/unit)

Computer:PC model operating OS Windows® XP(SP2) and beyond


Main unit: AC200/220/230/240V ± 10%
Auto cleaner: AC100V (Step-down transformer)
Frequency: 50/60 ± 1Hz

Electric power consumption

Main unit:12kVA (MAX)
Auto cleaner: 1.5kVA (MAX)

Ground resistance:Less than 10Ω

Installation condition

Operation temperature: 5-40°C
Performance temperature: 5-35°C
Humidity: Maximal relative humidity 80%RH between 5-31℃, Linearly decrease down to 50%RH between 31-40℃
Vibration: Duplex amplitude 20micron and less than 0.098m/S2 accelerations at frequency band

Required gas

He carrier gas: Purity greater than 99.995%, Pressure 0.35MPa
Stainless steel pipe(O.D.3mm) and suitable connecter fitting within 3m of unit
Dry air or N2 as operating gas: Pressure 0.45MPa
Nylon pipe(O.D.6mm) and suitable connecter fitting within 5m of unit

Cooling mechanism: Radiator unit (Separation type)

Electronic balance (Option)
Enable connection with electronic balance with 1-0,01mg minimum display

Optional automatic voltage regulator (AVR)

Weight: 130kg

Availability: In stock

Additional Information

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Used Spark Spectrometers | Spark Spectrometer | Optical Emission Spectrometers | X Ray Diffractometer
Memory usage: real: 32768000, emalloc: 32344872
Code ProfilerTimeCntEmallocRealMem